The Best Guide To Termite Control Process

What Does Termite Control Procedure Do?


Mud tubesUnlike ants, termites do not roam around on the soil surface or out in the open. They'll either tunnel through the soil or into timber (or other material) or else traveling inside pencil-size (or bigger )"sand tubes" that they assemble from dirt, wood particles and other substances. You will find these tubes on foundation walls, floor joists or different parts of the house.

What Does Termite Control Process Mean?Some Ideas on Termite Control Process You Need To
Break open the tubes to determine if termites are still active. An empty tube doesn't necessarily mean that termites are gonethey might have just abandoned this particular tunnel. Termites often rebuild damaged tubes, and it is another indication of current action. 'Old' tubes are dry and crumble easily, leaving behind"etching" on the surface which may be visible for decades (an indication that a home had termite activity at some time).

Tubes which are found on ceilings or on upper levels of a building may indicate you have an aboveground ("aerial") infestation, i.e., the termite colony really resides in the building and the termites are traveling from the ground. Mud tubes built by an aboveground colony usually contain substances other than dirt, e.g., wood and sheet rock or anything the termites are feeding on.

Some Known Factual Statements About Termite Control Process An Unbiased View of Termite Control Procedure

Termite Control Products for Dummies


In such situations, a thorough inspection may require elimination of siding or interior wallboards, etc.. More importantly for you, these aboveground infestations cannot be controlled using the usual soil treatment (see below) and therefore are generally excluded by a termite contract warranty. In such situations, finding and correcting the moisture problem is the first step to eliminating the termites. .

We tend to think of termites as feeding/injuring timber only. Termites actually feed on virtually anything that contains cellulose, the main component of wood, including wood paneling, paper products, cardboard boxes, art canvases, the paper covering of sheet rock, carpeting, etc.. While foraging and feeding, they could tunnel through non-cellulosic substances, such as plastic and foamboard.

The smart Trick of Termite Control Procedure That Nobody is Talking About


In fact, the amount of damage that termites cause depends on many aspects. In areas with cold winter temperatures, termite activity (and feeding) often declines, but does not necessarily cease. If the termites are well-protected from colder temperatures (e.g., underneath a slab), then activity might continue year-round. From a practical perspective, serious termite damage generally takes about 3-8 decades. .

There's absolutely no accurate method for determining the era of recently found harm. You need some reference point, i.e., some point in time when it was known there was no harm to this specific wood. That is one reason why annual inspections (and keeping your records of these inspections) are important. .

NOTE: These inspections are not a guarantee that you do not have termites or damage in areas that are not covered or not readily seen, such as inside walls. On the other hand, the inspections can reveal conditions that may imply that harm does exist and further investigation is needed.

In case you have a termite protection contract, contact the pest control company quickly and arrange for them to take a look at the issue. If you do not have a termite contract, telephone 2-3 (or more) companies and have every one inspect your house and offer you the specifics of their findings and any recommendations for a plan of action to correct any termite problems that they found.

Termite Control Procedure Fundamentals Explained


Termites do not cause significant damage in a brief period of time, so spending a few extra days or even a couple weeks will not make any actual difference in terms just how much damage occurs. .

Is there harm that should be repaired or Click This Link at least examined by a contractor or engineer before control steps are done

Simply spraying swarmers or the surface of accessible infested wood may kill the termites that you see now, but it does not block the infestation nor does it protect your house from potential attacks by termites. The most common type of termite treatment involves a"trench and cure" where a liquid insecticide ("termiticide") is placed on the soil surrounding crucial areas of your house.

Facts About Termite Control Procedure Uncovered


The dirt is trenched 6" deep and approximately 4-6" wide. For houses with crawlspaces, the soil along the interior foundation wall must be treated at least within 4 ft of identified signs of termite activity. In some circumstances, the soil around supports (for example, piers) underneath the house are also treated.

When implemented correctly, this treatment creates a continuous chemical barrier that should prevent termites from reaching the foundation and piers in your house. .

Concrete slabs that attach to the home, as an instance, a garage floor, or the slab of an earth-filled porch.

Leave a Reply

Your email address will not be published. Required fields are marked *